Hallo Zusammen,
@Thorsten: Ich habe heute schon Styrodurplatten gekauft da ich überhaupt keine Lust mehr auf müselige Puzzelarbeit habe um die Styroporreste großflächig zusammen zu bekommen. Den unteren Teil links/rechts/hinten werde ich damit verkleiden. Eigentlich habe ich die Holzrahmen Konstruktion des GWimGW so ausgelegt das das Holz keine stauende Näße bekommt, aber ich habe schon wieder Ideen wie ich diese AP zu einer Vollkunststoff Konstruktion umwandeln kann und aus diesem Grund ist es kein Problem wenn das Holz durch die Verkleidung mit den Platten diesen Winter leidet. Die Kamera ist nur eine freundliche Leihgabe meiner Firma, ich wüsste auch gar nicht was ich außer in diesem speziellen Fall damit anfangen sollte.
@Richard: Die Tillies haben laut Thermometer 22°C Wassertemp. Ich vermute das die 16,8°C Außentemp. der Scheibe eine Kombination aus Isolationswirkung und Strahlungsverlust sind. Wir hoffe auf die isolierende Wirkung, befürchte aber das der Strahlungsverlust überwiegt :-(
Tatsächlich werde ich die Acrylplatte auf dem Fischtank wie von Dir vorgeschlagen tauschen. Die Scheibe könnte ich vernünftiger weise mit einer zusätzlichen Doppelstegplatte verkleiden, andereseits bin ich so unvernünftig zu glauben das es den Tillies gefällt raus zu kucken und werde die Scheibe wahrscheinlich nur bei strengstem Dauerfrost verkleiden.
Generl habe ich gestern einige Schwachstellen entdeckt die ich am Wochenende (wenn die Weihnachtsdeko aufgebaut ist) beseitigen werde. Heute habe ich mit Birgit eine systematische Analyse der Außenflächen vorgenommen und es ist ein Temperaturtrend von links nach rechts zu erkennen der wiederum zu einer markanten Schwachstelle passt.
Ich hoffe mal das die Wetterprognose passt und wir am Wochenende wie aktuell vorhergesagte und vergleichbare Außentemp. haben so das ich mir die erneute Analyse der Außenflächen vor dem Isolieren sparen kann und lediglich das Endergebnis der Isolationsmaßnahmen erfassen muss.
Die Analyse hat auf den Außenflächen bis zur Unterkante des GW eine Durchschnittstemp. von ca. 2,2°C ergeben und ich bin der Auffassung das ich mit der geplanten Isolation von diesen 6m^2 noch einiges an Strahlungsverlusten minimieren kann. Zzgl. der Schwachstellenbeseitigung sollte ich auf den Energiebedarf der alten AP kommen. Im Moment ist die Datenbasis (2 erfasste Tage) noch viel zu dünn und ich schwanke zwischen geschafft und ca. +10% = 1 kWh/Tag. Bei 150 kalten Tagen und 40Cent/Tag sind das 60€ und somit wären die 25€ für die Styrodurplatten ruck-zug reingeholt.
Die AP läuft jetzt erst seit 12 Tagen und ich möchte noch keine Risiken bei den Wasserwerten eingehen. Sind die Messungen erkennbar stabil werden die weitere Maßnahmen zur Reduzierung des Strombedarfs in Angriff nehmen:
Gibt halt immer mal wieder was zu berichten.
Gruß
Stephan
@Thorsten: Ich habe heute schon Styrodurplatten gekauft da ich überhaupt keine Lust mehr auf müselige Puzzelarbeit habe um die Styroporreste großflächig zusammen zu bekommen. Den unteren Teil links/rechts/hinten werde ich damit verkleiden. Eigentlich habe ich die Holzrahmen Konstruktion des GWimGW so ausgelegt das das Holz keine stauende Näße bekommt, aber ich habe schon wieder Ideen wie ich diese AP zu einer Vollkunststoff Konstruktion umwandeln kann und aus diesem Grund ist es kein Problem wenn das Holz durch die Verkleidung mit den Platten diesen Winter leidet. Die Kamera ist nur eine freundliche Leihgabe meiner Firma, ich wüsste auch gar nicht was ich außer in diesem speziellen Fall damit anfangen sollte.
@Richard: Die Tillies haben laut Thermometer 22°C Wassertemp. Ich vermute das die 16,8°C Außentemp. der Scheibe eine Kombination aus Isolationswirkung und Strahlungsverlust sind. Wir hoffe auf die isolierende Wirkung, befürchte aber das der Strahlungsverlust überwiegt :-(
Tatsächlich werde ich die Acrylplatte auf dem Fischtank wie von Dir vorgeschlagen tauschen. Die Scheibe könnte ich vernünftiger weise mit einer zusätzlichen Doppelstegplatte verkleiden, andereseits bin ich so unvernünftig zu glauben das es den Tillies gefällt raus zu kucken und werde die Scheibe wahrscheinlich nur bei strengstem Dauerfrost verkleiden.
Generl habe ich gestern einige Schwachstellen entdeckt die ich am Wochenende (wenn die Weihnachtsdeko aufgebaut ist) beseitigen werde. Heute habe ich mit Birgit eine systematische Analyse der Außenflächen vorgenommen und es ist ein Temperaturtrend von links nach rechts zu erkennen der wiederum zu einer markanten Schwachstelle passt.
Ich hoffe mal das die Wetterprognose passt und wir am Wochenende wie aktuell vorhergesagte und vergleichbare Außentemp. haben so das ich mir die erneute Analyse der Außenflächen vor dem Isolieren sparen kann und lediglich das Endergebnis der Isolationsmaßnahmen erfassen muss.
Die Analyse hat auf den Außenflächen bis zur Unterkante des GW eine Durchschnittstemp. von ca. 2,2°C ergeben und ich bin der Auffassung das ich mit der geplanten Isolation von diesen 6m^2 noch einiges an Strahlungsverlusten minimieren kann. Zzgl. der Schwachstellenbeseitigung sollte ich auf den Energiebedarf der alten AP kommen. Im Moment ist die Datenbasis (2 erfasste Tage) noch viel zu dünn und ich schwanke zwischen geschafft und ca. +10% = 1 kWh/Tag. Bei 150 kalten Tagen und 40Cent/Tag sind das 60€ und somit wären die 25€ für die Styrodurplatten ruck-zug reingeholt.
Die AP läuft jetzt erst seit 12 Tagen und ich möchte noch keine Risiken bei den Wasserwerten eingehen. Sind die Messungen erkennbar stabil werden die weitere Maßnahmen zur Reduzierung des Strombedarfs in Angriff nehmen:
- Die Reduzierung der Flut-Höhe so das das Hydrokultur-Granulat noch besser isoliert
- Die Ebbe-Flut Zeiten reduzieren um die entstehenden Turbulenzen zu reduzieren
Gibt halt immer mal wieder was zu berichten.
Gruß
Stephan
Auch unter ### www.drehruemchen.de/aquaponik/ ### Über Rückmeldungen zur Verbesserung der Homepage würde ich mich freuen.